In this lab we will take a look to confirm gearing IP version 6 interface.
This lab has three steps in the first step.
We need to configure geek 0 0 interfaces with the IP version 6 addresses as shown at ball this one and
this one in the second step we need to run the show IP version 6 interface brief command and check the
output
and in the last step we need to check these shows GDP neighbors command and.
Okay let's go we have Madrid and Miami again.
Let's go to the Miami first
model first.
I need to go to the core Fremont and to assign their IP address to an interface.
Remember that I need to go to the interface mode interface geek 0 0 and now it's time to attach the
IP version 6 hours to hear the command that I am using when I'm assigning the IP for address was IP
address.
As you remember but if I want to assign a piece Version 6 of this I'm using IP version 6 address.
Command
the address is
hopes it was something like that
deviate.
P.S. 85
in column column for flash 64.
That's it.
That's OK.
And don't forget the no show again.
And I need to copy this address cows Miami C IP address is the sixth version of this.
Let's go to the Miami and config mode
interface.
0 0 an IP version 6 arduous
this right
I just enter and type the no shut
pretty cool first step is done there is no problem and in the second step it saves me the run the show
IP version 6 in the face brave comment.
To show our answer to run these show comments we need to go to the
privileged exec Mort and let's issue that show IP version 6 interface brief these comments show us evil
if I attached an IP version 6 IP address to the related interfaces as you can see that the IP address
that I attached is in the Chigurh etc. turn 0 0
Okay I checked is a 2 no room shows GDP neighbors comment on Madrid
I'm going to Madrid.
As you know that you find it to issue a run comment.
O show command I need to go to the polls exact not but I have another option to if I put due at the
beginning of the comment I can use the show comment in the interface mode or conflict mode to you can
use it whatever you want.
Show CTP neighbors and third as you can and as you're gonna remember from the uh sections that I talked
to you before.
What CTP is doing is that's showing us the directly connected neighbor information as you can see that
from the output it has a directly connected member which name is Miami and Monterrey it's its local
interface when it's connecting to Miami.
Is
gigabit internet.
0 0 and we can also see that Madrid is a Cisco 2 9 0 0 or rather and
Miami is using its 0 0 port while its connecting to me.