1
00:00:00,740 --> 00:00:07,710
In the section we're going to talk about the West discovery and management and the maintenance.

2
00:00:07,750 --> 00:00:18,220
We're starting with C D P and L L the P C D P is a Cisco poop we're to report a used to share information

3
00:00:18,310 --> 00:00:20,150
about directly connected.

4
00:00:20,340 --> 00:00:27,490
Skardu ISIS this is an oil layer to function if you want to enable it globally.

5
00:00:27,550 --> 00:00:36,160
You can use the city be run command and if you want to enable it per interface you can use the CTP enabled

6
00:00:36,160 --> 00:00:47,230
commands under relate to the interface but CTP is active by default almost as Wurzels OK in here we

7
00:00:47,230 --> 00:00:52,430
are just two others connected directly connected to each other.

8
00:00:52,540 --> 00:01:04,870
And if I type for example the shows CTP neighbors comment on rather what I will see informations related

9
00:01:04,930 --> 00:01:15,100
to rather too such as its model such as the interfaces connected to this guy to refer to CTP as I told

10
00:01:15,100 --> 00:01:23,530
you I'm using the show's cheeping neighbors command for example in rather wan if I'm typing the show

11
00:01:23,530 --> 00:01:31,990
see the neighbors command and seeing the device ID is rather to which is the host name of the remote

12
00:01:31,990 --> 00:01:40,690
twice and and seeing that the local interface that I'm using when I'm connecting through rather to is

13
00:01:40,690 --> 00:01:53,080
the geek 00 and I can only this I can also see that I'm connected to the gig 00 port of the other two

14
00:01:53,740 --> 00:02:04,840
and I can also see that this is the way it is capable of are which means that there are other.

15
00:02:04,980 --> 00:02:13,440
And I can also see the module of the device which is Cisco 2 9 0 0 0 or rather.

16
00:02:13,640 --> 00:02:14,250
OK.

17
00:02:14,430 --> 00:02:23,490
We can also use show sleeping neighbors detail comment for verification and B.K. we can see the IP address

18
00:02:23,700 --> 00:02:33,820
and the platform and the capability port ID and the version informations sable Let's go ahead with the

19
00:02:34,060 --> 00:02:42,800
LDP l'Anglais or discovery protocol is used to share information about either directly connected devices.

20
00:02:42,810 --> 00:02:49,850
And that is then in the US through is then that actually that's the same thing with CVP.

21
00:02:49,980 --> 00:02:59,810
But that's the industry is that let's go ahead with the A.P.M. time protocol and T-P is a portal called

22
00:02:59,810 --> 00:03:07,780
use for Klook synchronization between the ISIS over packet switched where I believe latency data that

23
00:03:07,790 --> 00:03:18,910
works with an entity server and uses port number one and two and three over UDP a.p uses a hierarchical

24
00:03:19,090 --> 00:03:31,420
Sammul layered system of time services and each level of this hierarchy is the as stretchin stratum

25
00:03:31,420 --> 00:03:42,280
0 consists of high precision time keeping the Wes's such as atomic clocks and the GP has clocks and

26
00:03:42,280 --> 00:03:51,250
stretchin one is directly connected to threaten zero as you can see and other layers are connected through

27
00:03:51,250 --> 00:04:02,270
the network and they get their clock from the upper layer of to configure the NCP where just one command

28
00:04:02,330 --> 00:04:11,360
and our command is anti-peace server and the IP address of our NTPC server which is this IP address

29
00:04:11,390 --> 00:04:20,480
for example and became the show Antipas that is and show a.p as socialization for verification.

30
00:04:20,540 --> 00:04:29,270
Let's go with the password recovery process password recovery process is used to reset enable secret

31
00:04:29,270 --> 00:04:37,760
passwords and there are different procedures for sweats and do rather us to reset the Enable secret

32
00:04:37,790 --> 00:04:40,780
password via this recovery process.

33
00:04:40,790 --> 00:04:49,580
You must have a physical access to DeWyze and this process cannot be done remotely where towelette are

34
00:04:49,910 --> 00:04:50,720
S-sh.
