In the section Merrigan take a look to Edwins the edge RPE configuration and the trouble shooting.
By default guys Eli DRP automatically advertises summer grads to other Jayapura others.
But this feature is disabled after Cisco s release 15 0 1 app for previous versions auto summarization
feature can be disabled manually by using no or to summary command.
OK if you're using an I asked version which is parathas than this guy your major pick rather will automatically
summarize this Rutz representing by word route to this direction which is in here OK to disable it.
We should use no auto summary command.
To verify the edge or auto summarization You can also use the short P porticos command and check if
altar's summarization is enabled or not.
So you can also use the shell wiping your GAAP topology command as well and check if you can see why
a summary word in here or not.
As I told you before.
Yes Japie automatically summarizes networks at the classful boundary but this can cause some problems.
Guys For example you could help to others advertised the same network which is for example let's say
that
wandered Ansermet to 16 0 0 when in fact they wanted to advertise two different networks and they may
be 10 that's 0 0 Slish 24.
This is slash 16 and
20 that 0.
Ok what they mean is ok i'm cleaning in here.
Let's say that we have two others rather one and rather two in the year.
Let's say that we have two networks and there are
twenty not zero and
twenty one that's zero.
OK.
And let's say that we hear another two networks in here and they are
thoughted of zero and
two to one that's you're OK.
If this guy is would make all those summarization rather One-World.
Edward Thai's the
to these two not works as 00 and rather cruel.
So would Edward ties this school that works.
As 00 or OK as you can see that they are advertising the same thing.
But what they actually want to advertise is another that works.
All right.
To present this problem.
The proper solution is to turn off all of summarization and we can use Menil summarization if summarization
is necessary to configure and yet your Pimental summarization we are getting into the interface more
by typing interface and the related interface that command these IP summary address.
Yeah.
DRP and the S number them.
We are typing this summerize through UPS information 10 20 0 0 with the subnet mask of 14 so that we
are representing these separate for us by using just this watch to rather to also OK to configure in
our 2006 Jappy manual symbolization.
We are also using the same logic we are getting into the interface mode and the command is just IP version
6 some are re-address this time and the Lessel the rest of the command is the same.
By default Yeah GOP will limit itself to using no more than 50 percent of the interface bandwidth and
this value can be modified by network administrator by using the IP bandwidth person or P for example
1 and we can define another person tetch
Let's go ahead with configuring hello and hold timers for GOP.
Remember that if you're using oil SPF and if you're using different hello and they're timer's for each
others you should not perform and neighbors ship that when these two guys.
But it is possible for Turia others to become European neighbors even though the hello and hold timer's
do not match.
But that is an unstable adjacency Guice default.
Hello Taimur is five seconds and whole timer is three times the hello interval which is default the
15 seconds for the GOP.
And if Hello interval is change hold time is not automatically changed and must be configured manually.
For example if you want to change the whole interval time you are getting into the interface mode and
typing IP.
Hello interval for the GOP one.
And the world to the Jews.
And also you can change the whole time with the same comment.
Instead of using whole time to the yellow interval if you want to troubleshoot your idea or peak step
by step.
First you can check interface IP addresses and the subnet masks.
Then you can check your P S numbers.
They should match on each on each others and you should check the network statements.
If you are advertising the right networks and you can check the passive interface commands so basic
troubleshooting of the GOP comments are for IPV for they are show IP protocols show IP.
European neighbors show pure road show up the GOP and you can use show run pipes S..
Yeah Jappy and for fusion sakes we have the same commands.
Show our viewers this Pulo calls yet European ABERS route.
Yeah GOP topology N.S. edge up.