In our next section we are going to make a practice lup example on the packet tracer about the snow
pick.
We just have one step the Ekron place and it's same as the configured diciples.
On this one.
By specifying the truss of the entry and truss the parts for the figure.
So if you remember from our days is snooping less than the trust that ports are the transport of the
service.
First and the access port there is the ATP server is connected to will be a trusted port as well.
And secondly any other ports would be interested parties.
So if I want to check the figure you're going to be interested this is approved and will be addressed.
And this is through us that also the transport of us third and also the access port that is the it is
so is connected to is to us that as well.
So what I'm going to define for the dress support is will be the exhibition of pink trust and poured
onto us that port.
I'm going to define it IPD is snooping limit Ray.
All right.
Let's go and start with this.
So which one's configuration.
First I'm going to make the trunk configuration of this which one
I'm going to switch one
and switch port Maut trunk OK.
I accomplish I accomplish the trunk configuration on the switch one and for that I'm going to do is
first.
If you remember from our slice we need to define the IP DHC is sloping command and enable the dates
happen globally first and that's OK.
Second I need to define the violence that I'm going to use for this snooping.
In our example let's assume that we are using willen 10 for data communication and we use the data is
pink for Bil'in 10 or right IP does this snooping be learned.
And second we need to answer.
Third we need to enable the IP DHC option EDID to Wolley.
As you remember IP did super snooping information option is the comment that I'm going to use to activate
them.
I'm going to go to the sensitized amso interface first turn its euro forward.
I'm sorry zero and 24.
And I'm going to tie the IP.
It's the snooping trust comment that is showing me that I'm trusting the part.
All right.
Secondly I need to go to the
Access put
That's PCs connected to.
And I'm going to use which port access we learn to an OK.
And third I need to define the limit rate for this port IP.
They need to be snooping.
Limit rate will be 10 and the number of data packets that can be accepted in the port at the moment
will be just can.
OK guys.
That's it.
I accomplished this if this no ping configuration.
That's pretty simple as you can see just there are a few steps to accomplish.
But if you really know the concept and that's no problem you can do it very easily.
That's a simple.
And that's a really important feature that we need to use for our networks.
Curity.