Hi there, welcome once again, and this is the time for one of the amazing listen, that is how you
will apply cinematic effect on your video footage if you were looking for learning the cinematography.
This is one of the best Lexton is going to be for you.
And we are going to learn how you apply the cinematic effect.
So let me show you one example.
I placed some video files from our exercise file and let me play this video clip and you can take a
look at the preview, our program panel.
Let me play this one.
OK, cool.
It looks like our normal video footage, but we are going to apply the cinematic effect.
So let's take a look after outplaying the cinematic effect.
Let me play this one.
Now it looks much better than before, and we applied some blended flame footage in between our two
video clips, so let me place the indication bar over here and let me play this one and I can take a
look.
I pleased to defend video footage in our timeline.
So when the first video footage is going to be finished and when the new video footage is going to miss
Chorded, I added the flame footage.
So let me play this one for.
OK, just a second, we have a flame effect, OK, over here we have a flame effect and then
we have the prop effect at top and bottom.
So this is the entire process for making your video footage cinematic.
So let's take a look at how it will make your video footage in cinematic style.
So right now, I'm going to import some video footage from our exercise file folders, imported file,
a menu import option.
And inside our exercise file, it will get this video three video form and along with pixels of video,
one five three five six seven four.
We're going to import this three video of each our product panel.
So you just have to select them three and then you just have to go for open option.
Cool.
This is our three video footage and at first I'm going to place this video, three footage in our Prozac's
timeline.
So let's drag and drop this video footage and you can take a look.
This is a video footage of a cop who they are walking on the side and it's their own view.
OK, cool.
So let me play the video for this video from this one.
OK, so this video footage also from the same couple and you can take a look, we don't have any music
or we don't have any proper audio for this video footage.
And we are going to add this later.
OK, cool.
So you just assume this is the one hour general video footage, but we don't have yet any cinematic
effect and we are going to add this one.
So let's start the process.
So we have to apply an adjustment layer for this video footage.
And to add an adjustment layer, you just have to right.
Click with your mouse in our prosit panel, then you will get the new item option.
So from the menu item option, you will get this adjustment layer.
So you just have to go for adjustment layer.
And here is the pop up for creating the adjustment layer.
Here you have to play with and a high for your video resolution and then you have to go for the frame
per second.
And once you place the information for your design, our video footage, then you just have to go for
a walk option.
OK, this is our adjustment layer and I'm going to apply or I am going to place this adjustment layer
at our video track.
Three plays the adjustment layer at our video track Creber.
OK, you can ask me a question.
Why not in a video track to work?
Because we are going to place an amateur video for the video track toolbar there.
So I am placing this adjustment layer at a video trapped we were.
So let's pull this adjustment layer with the duration of our entire video.
OK, the duration of our entire video is fifty two seconds.
And I also pleased the adjustment layer for fifty two seconds as well.
So what is the benefit of adjustment layer.
The benefit of adjustment layer is when you will apply in effect in out a premier pro.
Then you have to customize or you have two settings manually for each and every video clip.
Suppose you want to crop top and bottom for this video footage and you have total ten or 20 video footage
in our timeline.
Right now we only have the two, but when you will apply the proper effect for the video footage three,
then only the crop effect will be applied for this video footage.
It will be not applied for the second one as because you did not added the video footage in the second
one.
But when you will do for twenty or thirty video footage, you just have to add the proper effect manually
for twenty or thirty times.
But if you apply the crop effect in adjustment layer and if you set the crop settings for adjustment
layer, then you don't have to apply singular different crop effect for each and every video clip.
If you just apply the crop in adjustment layer, then the crop effect will be applied all at twenty
or thirty video clips.
You don't need to add any single or separate effect to each and every video clip, and this is the main
benefit of adjustment layer.
So I added an adjustment layer and for making a cinematic effect, I'm going to use the crop effect
and I'm going to crop the top and a bottom.
So let's start the process of cropping.
To crop this video footage, we have to apply the crop effect.
So here is the option for bringing up the effects tab if they fixed tab and insurge.
But you have to type crop.
OK, here is the crop transform or crop effect and you have to build this crop effect.
Add the adjustment layer, not in the video footage.
So let me play some adjustment here.
And here is the effect control tab and you can take a look at the crop effect it's applied on and just
mentally are not applied on video footage.
And here is the settings of crop as we are going to crop for top and bottom and then we will have a
cinematic effect.
So here is the portion.
And right now all we have the zero percentage.
But I want to crop top for eight percent so you can write the minimal value over here.
And here is the preview.
You can take a look.
We have eight percent crop top as well as we are going to.
Prop eight percent at bottom.
So let me put the manuell value, OK, you can take a look.
We have eight percent of crop at bottom.
So eight percent crop top, eight percent crop at bottom.
So now it's looks like a cinematic effect.
So you can ask me a question, is really crop effect applied for the second video footage?
Right now we have the indication bar for our first video footage, but is it applied for the second
one?
So let me play the indication.
We're at our second video footage.
OK, you can take a look at the crop effect also applied for the second one.
So this is the measurable benefit of adjustment layer.
So now let me play the video clip from the beginning.
OK, now it's really looks good.
So right now we are going to add the flame effect for two videoclip when the first video clip is going
to be finished and when the second video clip is going to be started, we are going to add a flame effect.
So let's get back to our product panel.
Here is the product panel.
And I added a big sales video.
And this is the video about the flame.
And I am going to place this video footage at our video track toolbar.
So there's a drag and drop it.
OK, cool.
So let me play then.
No, not here.
OK, this is the video footage of Slim, but I am not going to place this Flamel footage for a long
and just I want to play this video footage of four as like a video transmissions.
But this is will be a flame effect.
So let me reduce the duration of this flame video footage.
OK, you can take a look.
So let me zoom in the area.
OK, I want to place this flame video footage in between of two video clip, OK?
Right now it's placed in the middle of a video clip.
So let me play this one.
OK.
You just seen when the video footage is playing and when this first video clip is going to be finished
and when the second video footage is going to get started, only the flame video footage is showing.
But we don't want to show the flames.
Video footage only, we want to show the first and the second video footage as well, along with the
flames or how it will do that.
You can do that very easily.
If you want to show them at Owens, then you have to use the blending mode for this flame video footage.
So you just have to select this flame video footage and in side effect control.
You will get the blending mode from the opposite option.
So this is the opposite option and inside of the option, it will get the blend mode.
So right now we have the normal blend.
But as I was saying that I want to show the first and second video footage along with this flame video
footage.
So the first and second video footage will be played and showed inside the flame.
So in that case, we have to use the blending mode.
But which blending what we will use, we will use overlay blending mode.
So you just have to go for a normal option.
And from there you will get a different type of blending option, like a multiple.
Let me show you the multiplayer also works well for Blended and you can take a look right now.
We have the preview of our first video Inside the Flame video.
But I'm not going to use the multiple.
I'm going to use the overlay.
So this is the overlay blending option.
Now, it really looks good, so let me zoom out.
The timeline.
And let me play the video footage from here.
OK, cool.
You've just seen a nice flame effect is performed in between these two video clips as like a transition.
Cool.
So only one thing is remain, that is we have to use music in this video footage as we don't have the
music part for this video footage.
And in that case, the can unlink the video.
But I'm not going to link the video right now.
I'm going to just place the music track at our audio track to where as because we don't have the proper
music with our video footage.
So let's import some music stuff while Mannu.
Port adoption and here is a full color.
I'm going to use this full color.
You just have to select it and then you have to click open.
Here is my music and let's place it in our audio check to work so we have the big land for our music
and I'm not going to use them all.
So I want to reduce that from music part.
And that's why we have to use a razor.
So here is always a tool.
Let me cut it in here and told me the selection tool once again for selecting the rest of the area.
And then you just have to press what?
Delete.
Cool.
So let's play the video footage from the beginning and let me play this clip.
OK, so this is how you will apply the effect of your videos.
This is how you will add the flame and this is how it will blend the flame videos in between our first
and second video.
And finally, you will have the cinematic effect for your videos so soon.
Next, listen.