1
00:00:01,220 --> 00:00:08,450
From time to time when you copy the path from the position and you pasted into position it does not

2
00:00:08,540 --> 00:00:11,340
pass in the correct position.

3
00:00:11,420 --> 00:00:15,340
It's not that the path is deformed but it is has shifted somewhat.

4
00:00:15,680 --> 00:00:16,960
Let's take an example here.

5
00:00:17,870 --> 00:00:22,820
To follow along with me please open the composition for jumping path.

6
00:00:23,160 --> 00:00:24,050
We have a path.

7
00:00:24,120 --> 00:00:31,140
This is a ship that is a busy path and if you look inside it has only a path one code.

8
00:00:31,170 --> 00:00:37,920
This is where we are going to copy the path since route select the path and press control-C or Kamensky

9
00:00:37,980 --> 00:00:39,390
on the map.

10
00:00:39,390 --> 00:00:45,150
Now in the next ship here we have a circle and this circle is just a normal shape.

11
00:00:45,240 --> 00:00:46,290
Nothing to worry about.

12
00:00:46,290 --> 00:00:53,390
It has a size and position this open the position here and says We have copied the path we can select

13
00:00:53,390 --> 00:00:59,860
the position and bring the time indicator for example to the beginning and press Contrave to copy it.

14
00:00:59,870 --> 00:01:05,520
Now you notice it didn't paste at all in the same position of the other path.

15
00:01:05,960 --> 00:01:14,320
This happens when you have done certain transformations to the path these transformations can be reflected

16
00:01:14,320 --> 00:01:20,770
in the position for example of the transform ellipse 1 or in the layer transformations.

17
00:01:20,890 --> 00:01:27,160
It really doesn't matter what really matters is how to correct this in how you want to correct the position

18
00:01:27,160 --> 00:01:28,080
and the mission here.

19
00:01:28,210 --> 00:01:32,880
To put it on top of the original path that's very easy.

20
00:01:32,950 --> 00:01:40,140
You select position and try always to put your time indicator on the first or last keyframe.

21
00:01:40,210 --> 00:01:42,150
Remember these are roving keyframe.

22
00:01:42,190 --> 00:01:43,910
So it doesn't matter where I put it.

23
00:01:44,020 --> 00:01:47,590
But in most cases it's good to put it on a certainty.

24
00:01:47,950 --> 00:01:54,790
And you know the shortcut is the best is to position someone and press K or J if you like to position

25
00:01:54,880 --> 00:02:01,100
on the keyframe then simply click on the path in the view and move it around.

26
00:02:01,110 --> 00:02:05,320
You can use also the arrow key is to adjust it at 100 percent.

27
00:02:05,320 --> 00:02:07,640
Then of course you can put off the path.

28
00:02:07,830 --> 00:02:09,300
Now you have corrected it.

29
00:02:09,330 --> 00:02:15,680
So the trick here is to click on position to select all the keyframes position the time indicator on

30
00:02:15,680 --> 00:02:19,060
one of the keyframes and start moving it around.

31
00:02:19,070 --> 00:02:24,780
Now if you don't select the position like this you select one carefully and then try to move the path

32
00:02:24,990 --> 00:02:28,720
not just now a movie a single note here and it's not good at all.

33
00:02:29,070 --> 00:02:36,750
So this is how to correct the motion path or the position motion path when it has shifted or pasted

34
00:02:36,750 --> 00:02:38,130
in a different position.

35
00:02:38,130 --> 00:02:39,720
Thank you very much for listening.

36
00:02:39,720 --> 00:02:41,030
I will see you in the next lecture.