1
00:00:01,430 --> 00:00:07,550
Guys in this lecture you are going to learn how to create burst elements and we see a variation of them.

2
00:00:07,550 --> 00:00:12,440
But what is very important is to understand the concept and then later on you can apply them to your

3
00:00:12,510 --> 00:00:20,360
textual other ships to other animations for the videos and so on to get more dynamic motion graphics.

4
00:00:20,420 --> 00:00:25,340
The concept here is very easy to create a burst element you want to create an element then you want

5
00:00:25,340 --> 00:00:29,950
to appear and disappear so it's appearing while it's moving.

6
00:00:29,990 --> 00:00:36,720
And then is disappearing while this movie let's start for example let's come to 10 frames here and we

7
00:00:36,720 --> 00:00:38,930
create our first rectangle.

8
00:00:39,010 --> 00:00:45,530
I would create the square here small enough and remember if you want to come to the rectangle transform

9
00:00:45,530 --> 00:00:50,250
here and put it in the middle of it's only 0 0.

10
00:00:50,340 --> 00:00:53,790
I put the end point in the middle of the ship itself.

11
00:00:54,470 --> 00:00:59,520
So first you start getting the animation then you apply the repeater.

12
00:00:59,600 --> 00:01:04,970
In our case here we are going to animate inside the rectangle one the size and the position and he made

13
00:01:04,970 --> 00:01:05,840
the stroke.

14
00:01:05,990 --> 00:01:10,370
You could come in and animate anything you would like within the transform with tangled one of which

15
00:01:10,370 --> 00:01:11,830
will walk.

16
00:01:11,880 --> 00:01:17,280
So I'll give frame the size that keyframe the position and remove the chimney on the sides and make

17
00:01:17,280 --> 00:01:23,690
it for example 50 and 50 then I will move forward.

18
00:01:23,690 --> 00:01:26,550
Now you need to change the position so let's take it out.

19
00:01:26,640 --> 00:01:32,170
OK so it lives of here and now you have the choice you can for example take it to 0 0.

20
00:01:32,280 --> 00:01:36,220
I will keyframe the size again just to create more layers later on.

21
00:01:36,740 --> 00:01:42,580
And less now animate the stroke which is the best animation you can have to remove them.

22
00:01:42,660 --> 00:01:47,540
I put the slope to zero here and it keyframe it come back at 10 frames just over here.

23
00:01:47,690 --> 00:01:49,370
But the rock back to three.

24
00:01:49,670 --> 00:01:52,060
You have a very simple animation for it.

25
00:01:52,060 --> 00:01:56,640
You notice how it's appearing and disappearing.

26
00:01:56,720 --> 00:02:01,200
Very nice not to supply any Peter come to content.

27
00:02:01,230 --> 00:02:03,660
Click on Add and apply the repeater.

28
00:02:03,660 --> 00:02:07,100
Now of course repeatedly you want to knock down the position.

29
00:02:07,100 --> 00:02:11,540
Here you put it 0 and then you want to give it for example it copies.

30
00:02:11,730 --> 00:02:15,680
And then in the rotation here it would be 360 over it.

31
00:02:15,690 --> 00:02:19,410
So if you play here you are not quite beautiful.

32
00:02:19,410 --> 00:02:22,260
This is your first burst element.

33
00:02:22,290 --> 00:02:25,130
Now maybe we cut it off so it is from here.

34
00:02:26,440 --> 00:02:28,560
Here you are quite nice.

35
00:02:28,590 --> 00:02:34,170
So you have now your first one of course you could have played on the sites for example the size here.

36
00:02:34,190 --> 00:02:35,380
They have confirmed that.

37
00:02:35,490 --> 00:02:37,350
Let's put it at zero.

38
00:02:37,770 --> 00:02:38,270
OK.

39
00:02:38,280 --> 00:02:42,930
So the size will grow and the rectangle will disappear or the square.

40
00:02:42,930 --> 00:02:44,310
This is your first one.

41
00:02:44,310 --> 00:02:47,120
This is the first burst element.

42
00:02:47,130 --> 00:02:48,290
Let's do another one now.

43
00:02:48,290 --> 00:02:52,730
The stick this left to the beginning would you pick this player control D.

44
00:02:53,040 --> 00:02:55,550
And of course open the keyframes here.

45
00:02:55,620 --> 00:02:56,610
That's enough.

46
00:02:56,610 --> 00:02:57,310
I would solve it.

47
00:02:57,310 --> 00:02:59,640
So I sit alone now and the beginning here.

48
00:02:59,670 --> 00:03:00,630
I don't want the 0 0.

49
00:03:00,630 --> 00:03:01,760
I remove the chain link.

50
00:03:01,800 --> 00:03:10,380
I'll put two and 100 and the next keyframe Also I will use j r k to go to the next keyframe and keep

51
00:03:10,380 --> 00:03:13,330
it to 100.

52
00:03:13,340 --> 00:03:16,400
So it's very practical to keep the size defamed.

53
00:03:16,430 --> 00:03:17,180
Here you are.

54
00:03:17,240 --> 00:03:19,550
You have a very nice you know an image.

55
00:03:19,610 --> 00:03:20,650
Let's put them together.

56
00:03:20,660 --> 00:03:22,350
They're going to come on top of each other.

57
00:03:22,630 --> 00:03:28,450
Fine you only have to do is to move this one a bit and here you may be a bit more.

58
00:03:28,630 --> 00:03:31,550
And here you are you have two burst elements that are very good.

59
00:03:33,270 --> 00:03:37,810
Now you can add more if you like to I will duplicate Shipler two.

60
00:03:38,220 --> 00:03:39,760
Now Forshay play three.

61
00:03:39,900 --> 00:03:42,030
Let's do more changes here.

62
00:03:42,030 --> 00:03:45,760
For example let's solve it and we can see how it's working.

63
00:03:47,890 --> 00:03:50,640
Let's add the number of copies we come here.

64
00:03:50,740 --> 00:03:57,060
For example we say 18 of them and then if you come to the repeater you need to adjust the rotation.

65
00:03:57,100 --> 00:03:59,790
So there will be 360 by the.

66
00:04:00,140 --> 00:04:01,410
Case you have more of them.

67
00:04:01,630 --> 00:04:03,640
And you know how they are bursting.

68
00:04:03,640 --> 00:04:04,120
Good.

69
00:04:04,270 --> 00:04:06,130
Let's look at how all our work.

70
00:04:06,160 --> 00:04:08,790
Here you are of course.

71
00:04:08,790 --> 00:04:10,550
Now we want to delay it.

72
00:04:11,690 --> 00:04:15,460
OK if you play very nice animations pretty good.

73
00:04:15,650 --> 00:04:23,750
So this is the concept in general is to image first using the shape itself or using that transform shape.

74
00:04:23,900 --> 00:04:28,830
And then you replicate through the repeater and you have this nice Bearse elements.

75
00:04:28,960 --> 00:04:32,040
Pretty easy by the way and you can be very creative here.

76
00:04:32,420 --> 00:04:33,220
Thank you very much.

77
00:04:33,260 --> 00:04:34,960
I'll see you in the next lecture.