-: In this section of the course, we're going to cover printers
and multifunction devices known as MFDs.
As we jump into this section,
we're going to be focused, once again,
on domain three, hardware.
As we go through this section,
we're going to fully cover objective 3.6.
Objective 3.6 states that given a scenario,
you must be able to deploy and configure multifunction
devices or printers and their settings.
Now as we begin this section,
we're going to first take a look at how you can unbox
and set up a printer or MFD.
Next, we'll move into the different methods
of connectivity that's used with printers,
including local connections via USB, wireless connections,
and wired network connections.
Then we'll move into a discussion concerning printer drivers
and how they can be used to ensure that what you see
on the screen is properly being recreated when you print it
out to a piece of paper.
After that, we're going to go over
the different configuration settings that are used
in printers and MFDs, including duplexing, orientation,
trace settings and quality settings.
Then we'll move into the ways that you can share
a print device with other users and how you can secure
your print devices.
Finally, we'll move into our coverage
of scanning services that you're going to be able to utilize
when you're working with a multifunction device or an MFD.
So let's get started with our coverage of printers and MFDs
in this section of the course.