WEBVTT 00:00.780 --> 00:01.150 Okay. 00:01.170 --> 00:07.780 So now that we configured our bias properly to boot into the USB stick that has the Cube's image. 00:07.800 --> 00:13.770 As you can see, we managed to successfully boot into cubes and we have the installer right here. 00:14.310 --> 00:17.580 So as you can see right now, we have two options. 00:17.580 --> 00:24.450 We can select the first option to go ahead and install cubes straight away, or we can go with the second 00:24.450 --> 00:31.140 option to test the hardware that we have first and then install cubes if everything is fine. 00:31.710 --> 00:33.720 So I'm going to go with the second option. 00:33.720 --> 00:38.550 So I'm going to press the down arrow and hit enter to first test the hardware that I have. 00:38.550 --> 00:42.510 And if everything is fine, we will go ahead and install cubes. 00:43.970 --> 00:44.420 Perfect. 00:44.420 --> 00:48.800 So we have the installer here, which means that we passed all the tests so far. 00:48.920 --> 00:51.950 Now the next steps are actually going to be pretty simple. 00:51.980 --> 00:54.070 First, it's asking us for the language. 00:54.080 --> 00:55.780 I'm going to keep it at English. 00:55.790 --> 00:58.200 You can change it to whatever language you want. 00:58.220 --> 01:01.310 So I'm just going to click on Continue here on the bottom. 01:01.310 --> 01:01.850 Right. 01:03.000 --> 01:07.570 Next, we have a window that allows us to change a number of settings. 01:07.590 --> 01:11.040 You can change the keyboard, the time, the language. 01:11.190 --> 01:13.800 I'm actually going to keep everything the same. 01:13.800 --> 01:21.420 The only thing that I want to change is under the system category in there, which is the installation 01:21.420 --> 01:22.410 destination. 01:23.070 --> 01:29.520 This is the location where Cubes is going to be installed to, and this is the only difference that 01:29.520 --> 01:35.940 I've always been talking about between installing cubes to us, a main operating system or installing 01:35.940 --> 01:37.860 it on a USB stick. 01:38.310 --> 01:44.730 So we're going to click on this to change the setting and this will show us a window that'll list all 01:44.730 --> 01:48.150 the storage devices connected to this computer. 01:48.810 --> 01:54.990 So the first storage device that I have there on the left, you can see the size of it is 931 gigabytes. 01:54.990 --> 01:58.950 This is the built in hard drive inside my computer. 01:58.950 --> 02:05.580 So if you want to install details on this hard drive as a main operating system on this computer, you'll 02:05.580 --> 02:07.560 need to select this hard drive. 02:08.310 --> 02:14.940 Alternatively, if you want to install cubes on a USB stick and then use it as a live operating system 02:14.940 --> 02:17.310 similar to what we were doing with tails. 02:17.310 --> 02:22.770 So you'll be able to connect it to any computer that supports cubes and use it on that computer. 02:22.770 --> 02:27.840 And then when you remove it, the computer will be back to using its default operating system. 02:28.110 --> 02:32.550 If you want to do this, then connect a second USB device to this computer. 02:32.580 --> 02:36.930 The minimum size of this USB device should be 32 gigabytes. 02:36.930 --> 02:43.170 As you can see, I have one connected to it and its size is actually 57 gigabytes, so it's over the 02:43.170 --> 02:43.830 minimum. 02:43.860 --> 02:49.950 So all I'm going to do right now is literally just click on the storage device that I want to install 02:49.950 --> 02:53.400 cubes to, which is my USB device right here. 02:53.970 --> 02:55.890 As you can see, it's ticked right now. 02:55.890 --> 02:59.730 So it's telling me that this is where Cubes is going to be installed to. 02:59.760 --> 03:06.030 And again, keep in mind that when you select a device in here, everything stored on this storage device 03:06.030 --> 03:09.150 will be removed and cubes will be installed there. 03:09.150 --> 03:14.190 So make sure you don't have anything important to you because it will be erased. 03:14.790 --> 03:18.090 So I'm going to click on down there on the top left. 03:18.970 --> 03:23.320 Now cubes by default will encrypt the storage device that you pick. 03:23.440 --> 03:27.070 So right now it's asking me for a passphrase to use for this. 03:27.070 --> 03:32.890 Encryption will be used in this password to unlock the storage device that we picked in the future when 03:32.890 --> 03:34.330 we want to use cubes. 03:35.080 --> 03:37.630 So I'm going to put my password in here. 03:38.810 --> 03:41.420 And I'm going to click on Save Passphrase. 03:42.670 --> 03:47.200 Now in general, you should go back to the main menu at this stage. 03:47.230 --> 03:51.970 In my case, the USB device that I picked is not formatted properly. 03:52.000 --> 03:55.400 I intentionally did this just in case you face this issue. 03:55.420 --> 03:58.510 So if you are back at the main window, this is perfect. 03:58.540 --> 04:03.970 If you got the same warning that I have right here, then follow what I'm going to do in order to properly 04:03.970 --> 04:07.360 format the storage device and install cubes on it. 04:07.720 --> 04:11.410 So we're going to click on Reclaim Space here at the bottom, right? 04:12.070 --> 04:14.260 We're going to click on Delete All. 04:15.500 --> 04:18.320 And we're going to click on Reclaim Space. 04:19.440 --> 04:20.100 And that's it. 04:20.130 --> 04:23.340 We're back at the main window and we're good to go. 04:23.640 --> 04:28.200 So we're going to click on Begin Installation on the bottom right here. 04:28.440 --> 04:32.040 Now, like I said, this will take some time, so be patient with it. 04:32.070 --> 04:37.980 It will even take longer time if you're installing it to a USB stick like I'm doing right now. 04:38.400 --> 04:43.230 So I'm going to pause the video and we'll resume once the installation is finished. 04:44.570 --> 04:44.950 Okay. 04:45.020 --> 04:47.630 So now the installation is complete. 04:47.750 --> 04:54.140 We will need to create a user in order to boot into cubes using the USB stick. 04:54.650 --> 04:57.620 So I'm going to click here on user creation. 04:59.020 --> 05:02.770 I'm going to set a username and then I'm going to set a password. 05:03.980 --> 05:05.840 And I'm going to click on Done. 05:08.700 --> 05:12.300 And right now I'm going to click on finish configuration on the bottom. 05:12.300 --> 05:12.870 Right. 05:14.340 --> 05:14.820 Okay. 05:14.820 --> 05:17.130 Now the configuration is complete. 05:17.130 --> 05:22.710 And as you can see here at the bottom, right, I can click on reboot to reboot the computer. 05:22.830 --> 05:30.450 And then if I keep the second USB stick connected to the computer, it will automatically boot into 05:30.450 --> 05:33.540 cubes because I change the boot order. 05:33.540 --> 05:40.500 Or if I disconnect all the USB sticks, it will boot into the default operating system that this computer 05:40.500 --> 05:41.340 runs on. 05:42.390 --> 05:44.160 So I'm going to click on Ridgewood. 05:45.260 --> 05:51.270 And as soon as the computer restarts, I will disconnect the first USB stick. 05:51.290 --> 05:59.840 This one, this is the one that I used to install the Cube's image and I kept the one, the second one, 05:59.840 --> 06:06.350 the bigger one, connected to the computer in order to boot into the Cubes operating system. 06:06.350 --> 06:10.610 And as you can see, it's automatically booting into cubes. 06:11.330 --> 06:15.260 So it's very important to distinguish between the two USB sticks. 06:15.260 --> 06:22.220 We use one of them in order to install cubes either to the built in hard drive as a main operating system 06:22.220 --> 06:24.740 or to another USB stick. 06:24.740 --> 06:31.760 And then if we installed it on another USB stick, the second one will be the one that we use when we 06:31.760 --> 06:35.330 want to boot into the actual operating system. 06:36.200 --> 06:39.270 Right now, it's booting into the operating system. 06:39.290 --> 06:40.670 Be patient with it. 06:41.000 --> 06:44.900 And as it's booting, as you can see, it's asking me for the disk password. 06:44.900 --> 06:50.060 This is the encryption passphrase that we chose when we installed cubes. 06:51.000 --> 06:58.290 So I'm going to enter it and hit enter and just wait for the operating system to start. 06:59.930 --> 07:04.130 Now we're going to click on Cubes or to set some final options. 07:04.430 --> 07:07.770 I'm going to keep everything to the default settings. 07:07.790 --> 07:13.700 You might want to enable this option if you want to download updates over the Tor network. 07:13.730 --> 07:16.820 I'm going to keep it unchecked because that will slow it down. 07:17.000 --> 07:22.130 Downloading updates is usually not bad, so you can just keep this unchecked. 07:22.730 --> 07:24.620 So I'm just going to click on Done. 07:25.810 --> 07:31.960 And wait for cubes to configure the virtual machines needed to run the whole operating system. 07:33.850 --> 07:34.240 Okay. 07:34.300 --> 07:37.490 So the configuration is finally complete now. 07:37.510 --> 07:43.050 This did take some time again and it actually seemed like it froze at some stage there. 07:43.060 --> 07:49.720 So you will get this during the installation process if it seems like it's stuck at a certain point, 07:49.720 --> 07:55.990 as long as the mouse is moving, then don't turn off the computer, just give it its time, be patient 07:55.990 --> 07:58.720 with it, and it should finish the installation. 07:59.170 --> 08:00.970 So now everything is done. 08:00.970 --> 08:04.120 I'm going to click on finish configuration here at the bottom. 08:04.120 --> 08:04.630 Right. 08:07.320 --> 08:07.560 On. 08:07.560 --> 08:07.950 Perfect. 08:07.950 --> 08:10.800 Now we have the normal login screen for cubes. 08:10.800 --> 08:16.770 So now in the future all you have to do is connect the second USB, stick to the computer that you want 08:16.770 --> 08:22.500 to boot cubes from, boot from USB, and you will get to the screen. 08:22.500 --> 08:25.170 You won't go through the configuration every time. 08:25.710 --> 08:29.130 So put the password that we said, hit enter. 08:30.610 --> 08:31.220 I'm perfect. 08:31.240 --> 08:35.140 Now we are inside the Cubes desktop. 08:35.170 --> 08:40.300 Now you can see this is very similar to a basic Linux interface. 08:40.390 --> 08:44.690 If you have some experience with that, you'll be able to easily navigate this. 08:44.710 --> 08:45.500 If you don't. 08:45.520 --> 08:46.530 Don't worry about it. 08:46.540 --> 08:49.900 We'll talk about it in details, in future lectures. 08:49.900 --> 08:56.950 But right now we finished installing cubes as a live operating system to a USB stick. 08:57.340 --> 09:05.590 Now to turn it off, we're going to go to the top right click on Shut Down and click on Shut Down Again. 09:07.890 --> 09:09.090 Now just to show you. 09:09.090 --> 09:16.770 So if I disconnect my second USB stick, this one right there, this is the one that we installed cubes 09:16.770 --> 09:17.430 to. 09:17.700 --> 09:20.700 So if I disconnect it and start my computer. 09:23.060 --> 09:29.600 You'll see that it's going to boot into windows into the operating system that it used to run before 09:29.600 --> 09:30.470 by default. 09:30.620 --> 09:37.340 So this is the whole point of installing cubes to a USB stick will be able to connect it to any computer 09:37.340 --> 09:41.140 that can run cubes, use cubes on that computer and what? 09:41.180 --> 09:46.970 And when we're done, the computer will be back to its original state and we'll be able to take this 09:46.970 --> 09:50.510 USB stick with us anywhere we want and use cubes from it.