Hire everyone in this theater all we're going to go ahead and create another Android application.
So just click on this.
Start in your Android studio project and then for the application name just type in here app 25.
OK.
And then click on next here.
Choose.
AP Are 16 Android 4.1 Jelly Bean for minimum STK next blank activity next.
And here click on finish.
OK.
Now let's actually select this hello world.
It takes you here and then press on delete key on your keyboard and then double click on this arrest
folder here.
Lay out activity underline make that example and then select this floating action button here and then
press on delete key on your keyboard.
OK.
So let's go back inside this content underline minute examine and then double click on this tab here.
So now we want to actually design the user interface of our application.
OK.
So first of all when it actually linearly out vertical here as you can see select this and put it at
the center of this relatively out here.
OK.
And now let's actually select these large takes here and put it at the center of these linearly left
vertical here and double click on it.
And for the text just type in here this is an array of double values.
OK.
This is an array of double values column and then press on Enter key on your keyboard.
OK.
And now let's actually select a horizontal scroll view here as you can see and put it inside this linearly
and vertical and at the center of this linearly arithmetical.
Here and here as you can see selects the layout of each of these horizontal scroll view here.
And as you can see are assigned the value for example rap content as you can see here are selectees
that content here for the left of this horizontal scale view here.
And for the length height again I select the wrap content for the height of this horizontal scroll view
here.
OK.
And then let's actually select a large text view and put it inside this horizontal scroll view here.
OK.
And then double click on it and delete the text of this takes you.
And for the ID just type in here the array double values.
OK.
Double values.
And that person enter the key on your keyboard.
OK.
And now let's actually select this horizontal scroll view here.
And then let's assign the value of 50 for the left height of these horizontal scroll view.
OK.
And then let's actually select and there are large stakes here and put it inside.
This is actually a vertical linearly two as you can here.
And then double click on it and for the text just type in here this is an array of integer numbers.
OK this is an array of integer numbers colon and then press on Enter key on your keyboard.
So now let's actually select this horizontal scroll view here and put it inside.
These are actually linearly alphabetical here.
OK.
At the center of this linearly are two vertical and again for the left.
Assign the value actually right content here.
And for the layout height is the value 50.
OK.
And then let's actually select this large text view here and put it inside this horizontal scroll view
here.
OK.
And then double click on it and delete the text of this text for you and for the ID just type in here
takes the integer numbers Arrey or the X the Auret integer numbers.
OK and then press enter key on your keyboard.
OK.
So let's actually now select this large stakes here and put it at the center of this linearly alphabetical
here and then double click on it.
And for the text just type in here this is an end of a one.
OK.
Or this is it's a one OK colon and then press enter key on your keyboard and then this actually select
this horizontal scroll view here as you can see we have this horizontal scroll view here and then put
it inside this linearly and vertical at the center of this linearly and vertical.
OK.
And for the lay out we assign the value of our content and for the length height assigned a value 50.
OK.
Now let's actually write a large text view into this horizontal scroll view here.
Double click on it deletes the text of this text.
And for the ID just type in here TXI the end of a one.
OK.
And then press Enter key on your keyboard.
Now let's actually select this large text view here OK and put it inside this linearly outward sequence
here as you can see it at the center of this linearly at where circle and double click on it.
OK.
And for the text just a here this is.
This is OK in one copy.
OK.
And every one copy and then our colon.
OK.
Put a column at the at the end of this text here and then press on Enter key on your keyboard.
OK so now let's actually this time it's actually drag and other logistics to you and put it below this
takes you here w the Chinese.
OK.
The read the text of the stakes for you and for the idea just taping here takes the int array one copy
and then press on Enter key on your keyboard.
OK so now let's actually select this switch here.
OK.
You have the switch here and put it below this takes you here at the center of this linearly and vertical
here and then as you can see if I double click on it here.
Now this switch here has actually a text attribute.
So let's actually delete the text of this switch here.
And for the ID just type in here s w t equal and then press on Enter key on your keyboard.
OK.
Now it is actually a drag and other large text view here.
Below it is a switch here.
And double click on it.
And for the text just type in here the location of our element.
OK.
Of our Aure element and then press enter key on your keyboard.
OK.
And then let's actually select this large stakes here and put it below.
This takes you here and at the center of this linearly as vertical here.
OK.
Double click on it.
Delete the takes of this text view and for the ID just type it here takes the location of a element
and then press enter key on your keyboard.
OK.
So now let's actually go back inside this main activity that double file here and delete these are takes
abuse.
These are text that are actually related to the menu options button here.
OK.
And then let's actually delete this block of code that is related to the floating action button.
And now we can actually put in our own codes here.
Now I'm going to actually paste in some lines of code here.
OK.
And then I'll explain to you what's going on here.
OK.
So here as you can see I created some text objects here and then I created an object from these.
So each class here.
So as you can see in line 19 here I created an object from this textbook class takes the RTW values
and here are the first to this ID DXi R8 double values.
Again I created another object from the States view class the X the numbers are a T X the at integer
numbers here.
This ID takes you to the end of a one.
And here I'll refer to this as a tool is actually Id r that Id itx the end at a 1.
I actually created another object from this text view class here and here I referred to this ID or that
Id RTX the end of a one copy.
And here I actually created another object from this text for your class TXI the location of R8 element.
And here I referred to this itx the location add a element and then I actually created an object from
the switch class S.W.A.T. Ikhwan and an ID for this ID it's W.T. equal.
OK so now let's actually putting some lines of code here.
First of all let's actually create an array of double values so as against a here I created an array
of double values here the data type of my arrow is double.
And here I specify that I want to actually create a one dimensional array here by putting up a pair
of brackets here.
And then here this is the name of my at AWB values array.
And as you can see here I actually instantiated this at a by assigning these values to this at.
OK.